Welded Custom Made
 |
 MERRY CHRISTMAS OUTDOOR INDOOR HANGING METAL CUSTOM WELDED MADE GREETER CHEER $3.99 Time Remaining: 9h 24m Buy It Now for only: $11.69 |
 RADAR MOUNT FOR MAST HEAVY DUTY CUSTOM MADE WELDED ALUMINUM $169.00 Time Remaining: 6d 7h 5m |
 Wine Bottle Holder Fat Cat Playing Guitar Hand Made Custom Welded Art $46.50 Time Remaining: 25d 19h 48m Buy It Now for only: $46.50 |
Question about my home made go cart plz help?
i have a custom go cart frame and i put a brigs and straton 5 hp engine on the back then for my rear axle i put a bar with bearings on each side of my frame and slid the bar through them. the i put a sprocket on the bar and welded it on (the sprocket has about 20 teeth so its kinda big) finally i put a size 41 chain on it from the engine to the sprocket. the engine is above the sprocket so the chain is going down. its about 16 or 17 inches away from each other (the cluthch on engine and the sprocket. but my problem is that it will barely move when someone gets in it but when i jack it up and turn on engine it spins fine any suggestions? (ps the chain is farely tight but not too tight
theirs about 11 teeth on top clutch
theirs about 11 teeth on top clutch
alot of times the problem is too much weight with the rider on it, try putting a small child on it, if that dont work try replacing the cluch with a larger one
lws CUSTOM MADE laser welding machine for turbine blades